Auto-Step Output Function	n value sent automatically when n/m function selection is selected (two options: approximately 2.5 seconds/step or approximately 5 seconds/step)
Sweep Functions	Sweep time (two options: approximately 16 seconds or approximately 32 seconds)
Memory Function	50 value sets (generated and measured values are stored as value sets with the same address (up to 50 value sets can be stored))
Measuring Unit Maximum Input	Voltage terminal: 300 V AC Current terminal: 120 mA DC
Current Terminal Input Protection	Fuses: 125 mA/250 V
Measuring Unit Ground Voltage	Maximum 300 V AC
Measurement Display Updating Rate	Approximately once per second
Serial Interface	Enabled when communication cable (RS232) is connected; sold separately as optional accessory
Display	Segmented LCD (Approx. 76 mm ° 48 mm)
Backlight	LED backlight; auto-off after one minute (from when LIGHT key is turned on)
Power Supply	Four AA alkaline batteries, or special AC adapter (sold separately)
Battery Life	Measurement off, output 5 V DC/10 kO or greater: Approximately 40 hours Simultaneous signal generation/measurement, output 5 V DC/10 kO or greater: Approximately 20 hoursSimultaneous signal generation/measurement, output 20 mA/5 V: Approximately 12 hours (using alkaline batteries, with backlight off)
Auto-Power-Off Function	Approx. 10 minutes (auto-power-off can be disabled through a DIP switch setting)
Applicable Standard	EN55011: 1998, Class B, Group 1 EN61326-1: 1997 + A1: 1998 IEC61010-1, IEC61010-2-31
Insulation Resistance	Across input terminal and output terminal, 500 V DC, 50 MO or greater
Withstand Voltage	Across input terminal and output terminal, 3.7 kVAC, for one minute
Operating Temperature And Humidity Ranges	0 – 50°C, 20 – 80% RH (no condensation)
Storage Temperature And Humidity Ranges	-20 – 50°C, 90% RH or less (no condensation)
External Dimensions	Approx. 190 ° 120 ° 55 mm
Weight	Approx. 730 g (including batteries)

Process / Calibration/Multifunction Calibrators Template
Type	Hand Held
Measure Voltage	Yes
Voltage Measurement Max	110 V
Voltage Measurement Min	0 V
Source/Simulate DC Current	Yes
Measure DC Current	Yes
Current Measurement Max	100 mA
Source/Simulate Resistance	Yes
Measure Resistance	Yes
Resistance Measurement Max	400 Ohms
Resistance Measurement Min	0 Ohms
Source/Simulate Frequency	No
Measure Frequency	No
Frequency Measurement Max	11 kHz (11000 Hz)
Frequency Measurement Min	1 Hz
Source/Simulate Pressure	No
Hart Compatible	No
FieldBus Compatible	No
Data Log Functions	Current, Frequency, Resistance, Voltage
Backlighted	No
Graphical Screen	No
Max Number of Readings Stored	51
Types RTD/Thermocouples Accepted	B, E, J, K, L, N, R, S, T, U
Intrinsically Safe(Calibrators)	No
Test Equipment General Attributes
Warranty	12 MONTHS (1 YEARS)
Product Weight	730 GRAMS (1.61 LBS)
Product Height	55 MM (2.17 IN)
Product Length	190 MM (7.48 IN)
Product Width	120 MM (4.72 IN)
Data Logging	Yes
HTS/Schedule B Number	9030.33.0040
ECCN Number	EAR 99
Calibration Included	Factory Calibration

Yokogawa CA51 Handy Multifunction Calibrator

Yokogawa CA51 Handy Multifunction Calibrator

Yokogawa CA51 Handy Multifunction Calibrator

Features Yokogawa CA51 Handy Multifunction Calibrator :

Specifications Yokogawa CA51 Handy Multifunction Calibrator :

Tech Specs

Process / Calibration/Multifunction Calibrators Template

Test Equipment General Attributes

Yokogawa CA51 Datasheet

CEK JUGA YANG INI

CV. SYARIFTAMA GLOBAL INDONESIA

LAYANAN PELANGGAN

INFORMASI

Transfer Bank

E-Wallet

Pengiriman/Kurir

© 2015 - 2022 CV. Syariftama Global Indonesia

BUAT PERMINTAAN HARGA