Specification MITECH MET402 Eddy Current Flaw Detector :
Technical parameters | MET402 |
Test range | 0-55mm |
Test channel | 2 |
Independent detection frequency | Single frequency |
Frequency range | 10Hz-10MHz, Step by 1KHz |
Crack detection accuracy | LxWxH 3mmx0.1mmx0.072mm (Using a flat probe to detect steel test blocks) |
Pipe inspection accuracy | 0.3mm through hole to 8db (20mm inside probe) |
Gain range | 0,0-99.0dB, Langkah demi langkah: 0,1 / 0,5 / 1 dB |
Phase rotation | 0-359° Continuously adjustable, step by 1/5/10 Deg |
Signal to noise ratio (SNR) | 10dB |
Profit ratio | (Y / X): 0,1-10,0 |
Probe drive | 1-8 |
Calibration curve | Equivalent amplitude |
Digital filtering | Lowpass: 0Hz-2000Hz; Qualcomm: OHz-2000Hz |
Point filters | 0-1024 |
Broadband | 100Hz-10M Hz |
A/D rates | 12bit 80 million |
Auto balance | Digital electronic balance |
Display method | Impedance, time base, circular hole, Cartesian coordinates, polar coordinates |
Scan speed | Levels 1-1000 |
Real-time hardware sampling | 10-bit AD converter with 160MHz sampling rate |
Alarm mode | Real-time alarms |
Alarm window | Fan, square |
Window adjustment | 1-12 Levels |
Storage type | SD card |
Test data | More than 5000 groups |
Detection parameters | More than 1000 groups |
Display | 5.7 inch color TFT-LCD liquid crystal display with 640 x 480 resolution |
Standby time | 10 hours |
Interface | LEMO-6 DB-15 |
Magnetic memory sensitivity | 5Gs |
Digital conductivity display range | 0,9% -110% IACS or 0,5-64MS / m |
Digital Conductivity Accuracy | 0,9% -65% IACS 0,5% 1ACS; more than 62% IACS: ± 1,0% |
The thickness of the non-conductive layer | 0 mm-0,648 mm |
Coating Thickness Accuracy | 0,025 mm (± 0,001 inci) |
Size | 240 x 175 x 75mm |
Overall weight | 1,5kg |
Produk asli Kami distributor langsung Mitech Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya Indonesia.