Lutron PS-9302 Pressure Meter

CV. Syariftama Multi Global has a wide range of Lutron products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Features Lutron PS-9302 Pressure Meter :

• Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new calibration are not necessary when change the new sensor .
• When change the new pressure sensor, just select pressure type ( 2, 5, 10, 20, 50, 100, 400 bar ) on the front panel button. The sensor type will memorize into the circuit permanently by EEPROM.
  8 kind pressure units ( bar, psi, Kg/cm2 mm/Hg, inch/Hg, meter/H20, inch/H20, Atmosphere ) select by push button on the front panel Optional full line presssure sensor ( 2, 5, 10, 20, 50, 100, 400 bar ) are available
• Auto shut off saves battery life.
• 4 pin DIN socket, 2 pins to provide DC 5 V exciting voltage ( power supply ) to pressure transducer, another two pins for accept transducer signal of 100mV full scale.
• Zero button on the front panel, easy adjust the zero value of pressure sensor.
• Push button gain adjustment, usage for calibration precisely if necessary.
• Separate pressure sensor, easy operation. & remote measurement.
• Microprocessor circuit assures maximum possible accuracy, provides special functions and features,
• Super large LCD display with contrast adjustment for best viewing angle.
• Records maximum & minimum readings with recall.
• Data Hold function for stored the desired value on display.
• Built-in low battery indicator.
• RS232/USB PC serial interface, can match the personal computer used as the Data Logger, Pressure
• Recorder…. & other mordern pressure measuring system.

Specifications Lutron PS-9302 Pressure Meter :

• Circuit: Microprocessor LSI circuit.
• Display:
• 61 mm x 34 mm supper large LCD display.
• 15 mm ( 0.6″ ) digit size.
• Display units: bar, psi, Kg/cm2, mm/Hg, inch/Hg, meter/H20 inch/H20, Atmosphere.
• Pressure transducer: Optional, exciting voltage DC 5V, Sensor max. range output is DC 100 mV.
• Zero adjust: Push button on the front panel.
• Span adjust: Push button gain adjustment, usage for calibration precisely if necessary.
• Transducer mV input signal: Approx 100 mV (Full Scale).
• Exciting output power supply: DC 5 V.
• Data hold: By push button.
• Data record: Record maximun & mininum readings.
• Data output: RS 232/USB PC serial interface.
• Sampling time: Approx. 0.8 second.
• Power off: Auto shut off, saves battery life, or manual off by push button.
• Operating temperature: 0 to 50℃ ( 32 to 122℉ ).
• Operating humidity: Less than 80% R.H.
• Power supply: 006P DC 9V battery(heavy duty).
• Power current: Approx. DC 8.5 mA.
• Weight: 345 g/0.76 LB
• Dimension: 180 x 72 x 32 mm ( 7.1 x 2.8 x 1.3 inch ).

Accessories included :

• Instruction manual……………………..1 PC

Optional accessories :

• Pressure sensor, PS100-xxBAR refer to the bottom description.
• Hard carrying case ( CA-06 ).
• Data acquisition software, SW-U801-WIN.
• RS232 cable, UPCB-01
• USB cable, USB-01