Tanya via WhatsApp

Fluke 805 Vibration Meter

Share on facebook
Share on twitter
Share on linkedin
Fluke 805 Vibration Meter

Fluke 805 Vibration Meter

Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

 


Produk asli Kami distributor langsung Fluke Harga murah. Pengiriman ke seluruh Indonesia.


Whatsapp :  0851 6306 9421
Email : [email protected]

Fluke 805 Vibration Meter

CV. Syariftama Multi Global has a wide range of Fluke products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

Features Fluke 805 Vibration Meter

  • Reliable, repeatable, accurate device for checking bearings and overall vibration
  • Features innovative sensor design that minimizes measurement variations caused by device angle or contact pressure
  • Provides consistent data quality at both low and high frequency ranges
  • Offers four-level severity scale to assess urgency of problems and bearing condition

Specifications Fluke 805 Vibration Meter

  • Low frequency range (overall measurement) 10 Hz to 1,000 Hz
  • High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz
  • Severity levels Good, satisfactory, unsatisfactory, unacceptable
  • Vibration limit 50 g peak (100 g peak-peak)
  • A/D converter 16-bit
  • Signal to noise ratio 80 dB
  • Sampling rate Low frequency  20,000 Hz
  • High frequency  80,000 Hz
  • Real time clock backup Coin battery

Sensor

  • Sensitivity 100 mV g ±10%
  • Measurement range 0.01 g to 50 g
  • Low frequency range (overall measurement) 10 Hz to 1,000 Hz
  • High frequency range 4,000 Hz to 20,000 Hz
  • Resolution 0.01 g
  • Accuracy At 100 Hz ±5% of measured value

Amplitude Units

  • Acceleration g, m/sec²
  • Velocity in/sec, mm/sec
  • Displacement mils, mm

Infrared Thermometer (Temperature Measurement)

  • Range -20°C to 200°C (-4°F to 392°`F)
  • Accuracy ±2°C (4°F)
  • Focal length Fixed, at ~3.8 cm (1.5 in)

External sensor

  • Fluke supports but does not provide external sensors
  • Frequency range 10 Hz to 1,000 Hz
  • Bias voltage (to supply power) 20 VDC to 22 VDC
  • Bias current (to supply power) Maximum 5 mA

Firmware

  • External interfaces USB 2.0 (full speed) communication
  • Data capacity Database on internal flash memory
  • Upgrade Through USB
  • Memory Up to 3,500 measurements

Radiated Emission

  • Electrostatic discharge: burst Standard EN 61000-4-2
  • Electromagnetic interference Standard EN 61000-4-3
  • RE Standard CISPR 11, Class A

Environmental

  • Operating temperature -20°C to 50°C (-4°F to 122°F)
  • Storage temperature -30°C to 80°C (-22°F to 176°F)
  • Operating humidity 10% to 95% RH (non-condensing)
  • Operating/storage altitude Sea level to 3,048 meters (10,000 feet)
  • IP rating IP54
  • Vibration limit 500 g peak
  • Drop test 1 meter

General Specifications

  • Battery type AA (2) Lithium Iron Disulfide
  • Battery life 250 measurements
  • Size (L x W x H) 24.1 x 7.1 x 5.8 cm (9.5 x 2.8 x 2.3 in)
  • Weight 0.40 kg (0.89 lb)
  • Connectors USB mini-B 7-pin, stereo audio output jack (3.5 m

 

 


Fluke 805 – Datasheet


Produk asli Kami distributor langsung Fluke . Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya indonesia.

Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.


 

CEK JUGA YANG INI

BUAT PERMINTAAN HARGA