CEIA SMD601 Plus Walk-Through Metal Detector

The SMD601 Plus is a very high sensitive Walk-Through Metal Detector. A full-height light bar displays the location of the detected metal masses in transit. This results in rapid identification of threats and a reduction or elimination of the need for manual searches. SMD601 Plus detects even the smallest metal items anywhere on or in the body.

Produk asli Kami distributor langsung CEIA Harga murah. Pengiriman ke seluruh Indonesia.

Whatsapp : 0851 6306 9421
Email : [email protected]

CEIA SMD601 Plus Walk-Through Metal Detector

CV. Syariftama Multi Global has a wide range of CEIA products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Features CEIA SMD601 Plus Walk-Through Metal Detector

Most sensitive WTMD, fully compliant with the NIJ-0601.02 and NIJ-0601.03 Standards
Quick, accurate analysis of all parts of the body of people in transit, from the shoe level to the crossbar
Accurate pinpointing of individual and multiple metal targets
Exceptional immunity to external interferences
New mechanical structure with high protection degree
Integrated correctional profiling system (optional)
Unmatched reliability

Fully compliant with the NIJ-0601.02 and NIJ-0601.03 standards

The SMD601 Plus further extends the detection sensitivity of the previous SMD601 to metal threats before considered undetectable due to their minimal dimensions and metal composition similar to the ones specified in the new NIJ-0601.03 Standard.

Accurate detection of all metallic threat items

Very accurate pinpointing of individual and multiple metal targets
Quick, accurate analysis of all parts of the body of people in transit, from the shoe level to the crossbar
Built-in programs to screen visitors and staff for weapons and contraband

Ultra-High Sensitivity capability. Examples of additional detectable targets: Disposable Razor Blades; Special metal items (e.g. AISI 300 series Stainless Steel); Bullets

New certified ip66 control unit enclosure

Total compatibility with previous control units
Robust structure through the use of high-performance polymers for the construction of housing
Waterproof / Dustproof: IP66 compliant (IEC 60529)
Exceptional impact resistance at low and high temperatures and resistance to corrosion from atmospheric agents
Display made with specific polymer to improve the visibility of the LEDs by increasing the definition and clarity

Unique alarm signalling

20 vertical localization zones
High visibility of the control unit and of the zone indication, independent from the operator position and the installation environment
Flexible Acoustic Alarm Signalling System: 10 Continuous and Pulsed Tones; 34 Special Sounds
10 Alarm Volume Levels
High Precision Transit Counter: In-Bound transits; Out-Bound transits; Alarm rate

Most powerful and versatile security features

Over 40 built-in Security Programs: Up to 22 pre-programmed Security Programs; Up to 20 user programmable Security Programs
Chip Card system for fast, simple and secure parameter changes (i.e. alarm volume and tone, counter reading, etc.) and security level selection.
Any security standard can be enhanced with selectable random alarm probability

Chip card system

The system allows Security Management to set the Security Level quickly, reliably and without having to program the device in any way.

Specifications CEIA SMD601 Plus Walk-Through Metal Detector

Gate structure

State-of-the-art, robust and washable panels
Antivandalic and antitampering IP66 control unit
Embedded high precision transit counters (2-beam photocells)
Antitampering ON/OFF switch
Protected against aging, weather and wear

Operational features

High discrimination and transit flow rates five or more times greater than other metal detection systems
Quick reset time as short as 0.2 seconds for high throughput rate
Very high detection speed (up to 15 m/sec.)
Built-in operational functional verification (OFV)
One-touch key reading of inbound, outbound and Security Level Data

Quality

Continuous self diagnostic system
Proven reliability
No periodic re-calibration and preventive maintenance required
No scheduled maintenance
Fully digital design

Alarm signalling

Multi-zone display bar for “height on person” localization
20 vertical localization zones
2 display bars programmable as zone indicators and/or pacing lights
Specific shoe alarm color indication
Green and red metering signals proportional to the mass of the detected target
10 selectable continuous and pulsed tone plus 34 special tones
10 selectable sound intensities ranging from 0 to 90 dbA at 1m
Random alarm capability with independent counters, alarm tone and alarm volume
Met-Identity technology (separate Ferrous and Non-Ferrous alarm signaling)

Type of signalling

Fixed or proportional to the mass in transit – visible from 6m under lighting of 4000lux
20 x4 distinct zones (20×2 entry side and 20×2 exit side)

Programming

Over 40 built-in Security Programs
Remote via Infrared Remote Control Unit, BT or Ethernet 10/100 base T (option) interface
Security level: International Standard (IS) command / Chip card
Local by Control Unit alphanumeric display and keyboard
Programming and chip card access protected by user and super-user passwords

Installation data

Automatic synchronisation between two or more metal detectors with distance of down to 5 cm without the use of external cables
One Touch Automatic Self Installation (OTS)

Certification and compliance

Fully compliant with the NIJ-0601.02 Standard requirements
Complies with the applicable Standards for Law Enforcement and Correctional Facilities
Compliant with applicable International Standards for electrical safety and EMC
Compliant with the applicable electromagnetic Standards on Human Exposure and Pacemaker Safety
Harmless to magnetic media (CD, tapes, etc.)

Environmental data