Atten AT7328 Analog Oscilloscope

CV. Syariftama Multi Global has a wide range of Atten products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Dual Channel 20 MHz Analog Oscilloscope

Specifications Atten AT7328 Analog Oscilloscope :

• Sensitivitas tegangan hingga 5mV-5V/DIV pada setiap channel.
• 0.2s/div to 0.5s/div Time Base(Uncal upto 20ns)
• Tegangan input: 400 Vpp (Max @10x probe)
• 8 x 10 cm Display Internal Graticule
• Trigger source: CH1, CH2, Line, EXT
• Trigger mode: AUTO, NORM, TV-V, TV-H
• TV signal synchronous function, TV Triggering Frame (V) & Line (H)
• Dilengkapi fungsi DUAL & ADD untuk kedua sinyal input
• Dilengkapi output untuk tegangan kalibrasi sebesar 2 Vpp/1 kHz
• Dilengkapi tombol pengatur intensitas cahaya & fokus layar

Features Atten AT7328 Analog Oscilloscope :

• VERTICAL AXIS
• Sensitivity
• 5mV~5V/DIV, 10 steps in 1-2-5 sequence (X5 MAG:1mV/DIV)
• Sensitivity accuracy
• 3% (5MAG: 5%)
• Vernier vertical sensitivity
• continuously variable to 1/2.5 or less of panel-indicated value
• Frequency bandwidth
• DC-20MHz (5MAG:DC-7MHz)
• DC-40MHz (5MAG:DC-15MHz)
• AC coupling
• Low limit frequency 10Hz. (With reference to 100KHz,8DIV.Frequency response with-3dB)
• Rise time
• Approx.17.5Ns (5MAG:Approx.50Ns) / 9.5nS (X5MAG: Approx.25nS)
• Input impedance
• Approx. 1M ohm//Approx. 25pF
• Square wave characteristics
• Overshoot: 5%(At 10Mv/DIV range) other distortions and other ranges: 5% added to the above value
• DC balance shift: 5mV~5V/DIV; 0.5 DIV, 1mV~2mV/DIV2.0DIV
• Linearity: < 0.1DIV of amplitude change when waveform of 2 DIV at graticule center is moved vertically.
• Vertical modes
• CH1 single channel
• CH2 single channel
• DUAL
• CH1 and CH2 are displayed ALT or CHOP selectable at any sweep rate.
• ADD
• CH1+CH2 algebraic addition
• Chopping repetition frequency
• Approx.250KHz
• Input coupling
• AC, GND , DC
• Maximum input