Specifications Alinco DJ-V17 Handy Talky :
- DJ-V27T
- T : TX222 – 224.995MHz RX216 – 249.995MHz
- DJ-V47 / S47
- T : TX430 – 449.995MHz RX410 – 470MHz approx
- E : TX/RX 430 – 439.995MHz
- Modulation : F3E (FM)
- Frequency step : 5,10, 12.5, 15, 20, 25, 30kHz step
- Memory channel : 200 channels + 1 call channel + 1 Repeater-Access parameter memory
- Antenna impedance : 50ohm unbalanced
Frequency stability
- DJ-V17 / S17 : +/- 5ppm
- DJ-V27/V47 / S47 : +/- 2.5ppm
- Supply voltage : DC 7.0 – 16.0V (EXT DC-IN)
- Current consumption : (Typical value) TX at High power V/S17 1.4A, V27T 1.6A, V/S47 1.7A
- RX at 500mW AF out : 250mA
- Stand-by : V/S17 70mA, V27T 80mA, V/S47 80mA
- Battery-save ON : average 26mA
Temperature range
- Unit -10digC to 60digC (+14digF to +140digF)
- Battery packs : -10digC to +45digC (+14digF to +113digF)
- Ground : Negative
- Dimensions : 58(W)x110(H)x36.4(D)mm (2.28″(W)x4.33″(H)x1.43″(D)) with EBP-65N w/o projection
- Weight : Approx.280g (9.9oz) with EBP-65N & antenna
Transmitter
- Power output:
- (Approx.value) V/S17 : 5W (with EBP-65N) 5W (with DC 13.8V) 0.8W (LOW output)
- V27T : 5W (with EBP-65N) 5W (with DC 13.8V) 0.8W (LOW output)
- V/S47 : 4.5W (with EBP-65N) 5W (with DC 13.8V) 0.8W (LOW output)
- Modulation : Variable reactance
- Spurious emission : -60dB or less
- Max. deviation : +/- 5KHz
- Mic. impedance : 2Kohm
Receiver
- System : Double-conversion super heterodyne
- Sensitivity : -14.0dBu (0.2uV) or less
- Intermediate frequency:
- DJ-V/S17 : 1st IF 21.7MHz 2nd IF 450kHz
- DJ-V/S47 & V27T : 1st IF 38.85MHz 2nd IF 450kHz
- Selectivity : -6dB : 12kHz or more -60dB: 26kHz or less
- AF output : 500mW (MAX) / 400mW (8ohm, 10% distortion)
