Aditeg OS-620 Analog Oscilloscope

CV. Syariftama Multi Global has a wide range of Aditeg products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

Specifications Aditeg OS-620 Analog Oscilloscope :

Vertical System

• Sensitivity 5mV~5V/div,10 steps in 1-2-5 sequence
• Sensitivity Accuracy 3%(x5 MAG: 5%)
• Vernier vertical Sensitivity To 1/2.5 or less
• Frequency Bandwidth DC~20MHz(x5 MAG:DC~7MHz) AC Coupling: 10Hz
• Rise Time Approx:17.5ns(x5 MAG:50ns)
• Input Impedance Approx:1M/25pF
• Square wave Overshoot: 5%(At 10mV/div range)
• Characteristic Other distortions and other ranges:5% added to the above value
• DC Balance Shift 5mV~5V/div:0.5DIV, 1mV~2Mv/DIV 2.0DIV
• Linearity 0.1DIV of amplitude change when waveform of 2DIV at graticule center is moved vertically
• Vertical system: CH1: Channel CH2: ChannelDUAL: Channel 1 & Channel ADD: Addition of Channel 1 and Channel 2
• Chopping repetition Frequency Approx 250KHz
• Input Coupling AC, GND, DC
• Max Input Voltage 300Vp-p
• CMRR 50: 1(@50KHz sine wave)
• Isolation between channels(At 5mv/DIV range) at 50kHz ; >30: 1 at 20MHz

Vertical System

• CH1 Signal Output Min. 20mV/DC (50 output bandwidth 50Hz~5MHz)
• CH2 INV BAL Balance variance ratio1DIV

Triggering

• Triggering Soure CH1, CH2, LINE, EXT
• Coupling AC: 2MHz~20MHz: 1.5DIVSlope: +/-

Horizontal System

• Trigger signal Input Impedance Max Input Voltage: Approx 1M/25pF 300V(DC+AC peak)AC not exceed 1KHz
• Sweep time: 0.2uSec 0.5Sec/DIV, 20 steps in 1-2-5 sequence
• Vernier sweep time control: 1/2.5 of panel-indicated value
• Sweep magnification: 10 times
• x10MAG Sweep time accuracy: 5%,
• Linearity 3%, x10MAG: 5%(20ns and 50ns are uncalibrated) 5) X-Y Mode
• BandwidthDC~500KHz
• Ukuran kemasan : Panjang 53 Cm x Lebar 42 cm x Tiggi 27 cm

Accessories included :

• Aditeg OS-620
• User manual
• Power Cord
• Probe x1, x10 ( 2 Pcs )